Mapei UK HQ

Mapei UK HQ

After completing the removal of contaminants from the surface of the existing floor using our HTC Grinding Machines, we primed the surface using Mapei Primer SN and, while still wet, broadcast a kiln-dried 1.2mm aggregate across the surface that would act as a mechanial bond for the topping screed.

We then divided the floor using a stainless steel edge trim to create a patterned colour barrier. The Ultratop was then laid at separate intervals so as not to contaminate the adjacent colour and left to cure. Once dry, the grinding and polishing process commenced and we completed the floor at a 3000 grit finish.